SUMMIT SMARTCUT BIG HOLE CNC LATHES
6.1″ to 21″ Spindle Bores, 26″ to 63″ Swings, Center Distances: 80″ to 240″
Categories: Engine Lathes, Turning
Overview
Specifications
Standard Features
- Available in 60″ – 200″ center distances
- Up to 19,600 lbs. part capacity
- Heavily ribbed cast bed and base
- Hardened and precision ground bed ways
- Precision ground ball screws
- Infinitely variable speed ranges
- Yaskawa spindle drive
- Constant surface speed
- Fine feed electronic hand wheels
- Inch-metric capabilities
- T-slotted cross slide for multiple accessory compatibility
Included Accessories
- Steady rest with roller tips
- Coolant system
- Work light
- Sliding enclosure doors
- 3 or 4 jaw chuck (except SC42)
- Front and rear 4 jaw chucks (SC42)
| SPECIFICATIONS: | SC26 | SC30 | SC33 | SC42 | SC47 | SC55 | SC63 |
|---|---|---|---|---|---|---|---|
| Capacities | |||||||
| Swing over bed | 26.3″ | 30.3″ | 33″ | 41.7″ | 47.2″ | 55.1″ | 63″ |
| Swing over slide | 15.75″ | 19.6″ | 22.4″ | 26″ | 29.5″ | 37.4″ | 45.2″ |
| Headstock | |||||||
| Hole thru spindle | 6.1″ / 9″ | 6.1″ | 9″/10.2″ | 12.2″ / 14.1″ | 21″ | ||
| Spindle Speeds (no.) Range | (infinitely variable) 11-800 RPM /4-600 RPM |
(inf variable) 11-800RPM |
(inf variable) 4-600RPM |
(inf variable) 3-400RPM |
(inf variable) 2-300RPM |
||
| Spindle Nose | A2-11 /A2-15 | A2-11 | A2-15 | A2-20 | A2-28 | ||
| Feed Rate | |||||||
| X Axis | 0 – 200 IPM | ||||||
| Z Axis | 0 – 200 IPM | ||||||
| Tailstock | |||||||
| Tailstock – quill diameter | 3.7″ | 4.9″ | 7.8″ | ||||
| Tailstock – quill travel | 9″ | 11.8″ | 11.8″ | ||||
| Motors | |||||||
| X Axis Servo | 2.5 HP | 4.5 HP | 6.5 HP | ||||
| Z Axis Servo | 4.8 HP | 6.5 HP | 6.5 HP | ||||
| Spindle Motor | 20 HP | 30 HP | 50 HP | ||||
Overview
Standard Features
- Available in 60″ – 200″ center distances
- Up to 19,600 lbs. part capacity
- Heavily ribbed cast bed and base
- Hardened and precision ground bed ways
- Precision ground ball screws
- Infinitely variable speed ranges
- Yaskawa spindle drive
- Constant surface speed
- Fine feed electronic hand wheels
- Inch-metric capabilities
- T-slotted cross slide for multiple accessory compatibility
Included Accessories
- Steady rest with roller tips
- Coolant system
- Work light
- Sliding enclosure doors
- 3 or 4 jaw chuck (except SC42)
- Front and rear 4 jaw chucks (SC42)
Specifications
| SPECIFICATIONS: | SC26 | SC30 | SC33 | SC42 | SC47 | SC55 | SC63 |
|---|---|---|---|---|---|---|---|
| Capacities | |||||||
| Swing over bed | 26.3″ | 30.3″ | 33″ | 41.7″ | 47.2″ | 55.1″ | 63″ |
| Swing over slide | 15.75″ | 19.6″ | 22.4″ | 26″ | 29.5″ | 37.4″ | 45.2″ |
| Headstock | |||||||
| Hole thru spindle | 6.1″ / 9″ | 6.1″ | 9″/10.2″ | 12.2″ / 14.1″ | 21″ | ||
| Spindle Speeds (no.) Range | (infinitely variable) 11-800 RPM /4-600 RPM |
(inf variable) 11-800RPM |
(inf variable) 4-600RPM |
(inf variable) 3-400RPM |
(inf variable) 2-300RPM |
||
| Spindle Nose | A2-11 /A2-15 | A2-11 | A2-15 | A2-20 | A2-28 | ||
| Feed Rate | |||||||
| X Axis | 0 – 200 IPM | ||||||
| Z Axis | 0 – 200 IPM | ||||||
| Tailstock | |||||||
| Tailstock – quill diameter | 3.7″ | 4.9″ | 7.8″ | ||||
| Tailstock – quill travel | 9″ | 11.8″ | 11.8″ | ||||
| Motors | |||||||
| X Axis Servo | 2.5 HP | 4.5 HP | 6.5 HP | ||||
| Z Axis Servo | 4.8 HP | 6.5 HP | 6.5 HP | ||||
| Spindle Motor | 20 HP | 30 HP | 50 HP | ||||
