Home / Machine Tools & Parts / Milling / FRYER TC-H Traveling Column Horizontal Machining Center

FRYER TC-H Traveling Column Horizontal Machining Center

Traveling Column Horizontal Machining Center

  • Fixed table features high load capacity
  • Large X axis travel to 320″
  • Z axis travel of 24″ or 32″
  • Fast set-up and operation

TC-40H

40″ x 29″ x 26″

TC-80H

80″ x 24″ x 24″ (32″)

TC-120H

120″ x 24″ x 24″ (32″)

TC-160H

160″ x 24″ x 24″ (32″)

TC-240H

240″ x 24″ x 24″ (32″)

TC-320H

320″ x 24″ x 24″ (32″)

Categories: Milling

  • Specifications

  • Automation

  • Applications

TC-H SERIES SPECIFICATIONS TC-40H TC-80H TC-120H TC-160H TC-240H TC-320H
MACHINE CAPACITY X Travel 40″ 80″ 120″ 160″ 240″ 320″
Y Travel 29″ 24″ 24″ 24″ 24″ 24″
Z Travel 26″ 24″ (32″) 24″ (32″) 24″ (32″) 24″ (32″) 24″ (32″)
Table Load (Evenly Distributed) 8,000 lbs. 8,000 lbs. 10,000 lbs. 10,000 lbs. 14,000 lbs. 18,000 lbs.
Table Size 60″ x 24″ 80″ x 24″ 120″ x 24″ 160″ x 24″ 240″ x 24″ 320″ x 24″
T-Slots (No./Width) 5 / .787″
Table Top to Floor 38″
SPINDLE Motor HP (Peak) 40.0 HP
Spindle Speed (RPM) 60 – 6,000 RPM   (8K, 10K Optional)
Spindle Torque (max) 204 ft/lbs (800 ft/lbs w/opt gearbox)
Tool Type/Taper CAT 50   (CAT 40 Optional)   (BT Option)
Spindle Nose to Table (Max – Min) 30″ – 2″ 28″ – 4″ 28″ – 4″ 28″ – 4″ 28″ – 4″ 28″ – 4″
Spindle Center to Column 28″ 24″ (32″) 24″ (32″) 24″ (32″) 24″ (32″) 24″ (32″)
ATC Tool Storage Capacity 24 Station Arm Type   (30 and 40 tool optional)
Tool Change Time 4.0 seconds
Tool Change Time Chip to Chip 6.0 seconds
Max. Tool Diameter (full) 5.90″
Max. Tool Dia. (adjacent empty) 9.50″
Max. Tool Weight 30.0 lbs.
Max. Tool Length 16″
PERFORMANCE Positioning Accuracy +/- 0.0002″ +/- 0.0002″ +/- 0.0002″ +/- 0.0002″ +/- 0.0003″ +/- 0.0003″
Positioning Repeatability +/- 0.0001″ +/- 0.0001″ +/- 0.0001″ +/- 0.0001″ +/- 0.00015″ +/- 0.00015″
X Axis Drive Type Ballscrew Ballscrew Ballscrew Ballscrew Rack & Pinion Rack & Pinion
Rapid Traverse 1,000 X, Y, Z
Cutting Feed Rate .001 – 600 IPM
Servo Type AC Digital Brushless
Axis Thrust (Peak) 4,955 lbs. X, Y, Z
GENERAL INFO Air Pressure Requirements 90 PSI – 5 CFM
Coolant Capacity 100 Gallons
Coolant Flow 5 GPM
Power Requirements 80 AMP 400 – 500 VAC 3 PHASE
Operating Dimensions (WxDxH) 160″x138″x118″ 200″x138″x118″ 245″x138″x118″ 310″x138″x118″ 375″x138″x118″ 440″x138″x118″
Machine Weight 30,000 lbs. 32,000 lbs. 34,000 lbs. 40,000 lbs. 46,000 lbs. 50,000 lbs.

CNC Control

he Fryer – Siemens Touch 2200 CNC provides world class technology and ultra-advanced features in an intuitive user interface. This state of the art platform provides the ultimate for 5 axis, high speed machining, horizontal machine and turning applications alike. Fast set-up cycles, one button hot keys and built in probe cycles speed the set-up process. Shop floor programming, G code programming, large program storage and Ethernet connectivity speed the programming process. 3D solid model graphic verification, hand-wheel run and easy interrupt speed the first article process.

Features

  • One touch set-up cycles
  • Shop floor programming system
  • G code programming editor
  • Advanced graphic simulation

Technology

  • Advanced Digital Control System
  • Regenerative drive technology (saves 40% electric)
  • Absolute encoders – no homing needed
  • High accuracy contouring and surfacing

Tool Management

The tool management page stores your tool information in a graphical format. In addition, tools can be given tool numbers or actual names like .500 drill or .375 CBD end mill. Each tool can be managed for wear and switched automatically when the tool run time is reached.

Probe Cycles

The standard part probe cycles use a simple GUI to make part set-up simple. The cycles include edge find, part skew, pocket, boss and many more. The cycles can also be used to measure the part and display dimensions on the screen, much like a CMM.

Machining Options

The High-Speed Machining option lets you select 3 settings for the velocity, accuracy or surface quality to produce the workpiece at extremely high speed. Includes 500 block look ahead and 1 millisecond block processing.

3D Graphic Simulation

After the part is programmed it can be simulated to show the operations and tool paths. Simulation will also work with programs brought in from a CAM system that were output in G code. Cycle time is displayed also.

  • Specifications

TC-H SERIES SPECIFICATIONS TC-40H TC-80H TC-120H TC-160H TC-240H TC-320H
MACHINE CAPACITY X Travel 40″ 80″ 120″ 160″ 240″ 320″
Y Travel 29″ 24″ 24″ 24″ 24″ 24″
Z Travel 26″ 24″ (32″) 24″ (32″) 24″ (32″) 24″ (32″) 24″ (32″)
Table Load (Evenly Distributed) 8,000 lbs. 8,000 lbs. 10,000 lbs. 10,000 lbs. 14,000 lbs. 18,000 lbs.
Table Size 60″ x 24″ 80″ x 24″ 120″ x 24″ 160″ x 24″ 240″ x 24″ 320″ x 24″
T-Slots (No./Width) 5 / .787″
Table Top to Floor 38″
SPINDLE Motor HP (Peak) 40.0 HP
Spindle Speed (RPM) 60 – 6,000 RPM   (8K, 10K Optional)
Spindle Torque (max) 204 ft/lbs (800 ft/lbs w/opt gearbox)
Tool Type/Taper CAT 50   (CAT 40 Optional)   (BT Option)
Spindle Nose to Table (Max – Min) 30″ – 2″ 28″ – 4″ 28″ – 4″ 28″ – 4″ 28″ – 4″ 28″ – 4″
Spindle Center to Column 28″ 24″ (32″) 24″ (32″) 24″ (32″) 24″ (32″) 24″ (32″)
ATC Tool Storage Capacity 24 Station Arm Type   (30 and 40 tool optional)
Tool Change Time 4.0 seconds
Tool Change Time Chip to Chip 6.0 seconds
Max. Tool Diameter (full) 5.90″
Max. Tool Dia. (adjacent empty) 9.50″
Max. Tool Weight 30.0 lbs.
Max. Tool Length 16″
PERFORMANCE Positioning Accuracy +/- 0.0002″ +/- 0.0002″ +/- 0.0002″ +/- 0.0002″ +/- 0.0003″ +/- 0.0003″
Positioning Repeatability +/- 0.0001″ +/- 0.0001″ +/- 0.0001″ +/- 0.0001″ +/- 0.00015″ +/- 0.00015″
X Axis Drive Type Ballscrew Ballscrew Ballscrew Ballscrew Rack & Pinion Rack & Pinion
Rapid Traverse 1,000 X, Y, Z
Cutting Feed Rate .001 – 600 IPM
Servo Type AC Digital Brushless
Axis Thrust (Peak) 4,955 lbs. X, Y, Z
GENERAL INFO Air Pressure Requirements 90 PSI – 5 CFM
Coolant Capacity 100 Gallons
Coolant Flow 5 GPM
Power Requirements 80 AMP 400 – 500 VAC 3 PHASE
Operating Dimensions (WxDxH) 160″x138″x118″ 200″x138″x118″ 245″x138″x118″ 310″x138″x118″ 375″x138″x118″ 440″x138″x118″
Machine Weight 30,000 lbs. 32,000 lbs. 34,000 lbs. 40,000 lbs. 46,000 lbs. 50,000 lbs.

  • Automation

CNC Control

he Fryer – Siemens Touch 2200 CNC provides world class technology and ultra-advanced features in an intuitive user interface. This state of the art platform provides the ultimate for 5 axis, high speed machining, horizontal machine and turning applications alike. Fast set-up cycles, one button hot keys and built in probe cycles speed the set-up process. Shop floor programming, G code programming, large program storage and Ethernet connectivity speed the programming process. 3D solid model graphic verification, hand-wheel run and easy interrupt speed the first article process.

Features

  • One touch set-up cycles
  • Shop floor programming system
  • G code programming editor
  • Advanced graphic simulation

Technology

  • Advanced Digital Control System
  • Regenerative drive technology (saves 40% electric)
  • Absolute encoders – no homing needed
  • High accuracy contouring and surfacing

Tool Management

The tool management page stores your tool information in a graphical format. In addition, tools can be given tool numbers or actual names like .500 drill or .375 CBD end mill. Each tool can be managed for wear and switched automatically when the tool run time is reached.

Probe Cycles

The standard part probe cycles use a simple GUI to make part set-up simple. The cycles include edge find, part skew, pocket, boss and many more. The cycles can also be used to measure the part and display dimensions on the screen, much like a CMM.

Machining Options

The High-Speed Machining option lets you select 3 settings for the velocity, accuracy or surface quality to produce the workpiece at extremely high speed. Includes 500 block look ahead and 1 millisecond block processing.

3D Graphic Simulation

After the part is programmed it can be simulated to show the operations and tool paths. Simulation will also work with programs brought in from a CAM system that were output in G code. Cycle time is displayed also.

  • Applications

Related Products