Home / Machine Tools & Parts / Milling / FRYER MB-R Series

FRYER MB-R Series

Toolroom Bed Mill with Rigid Spindle Head

  • Rigid Spindle & Optional Tool Changer
  • Compact size
  • Fast Set-Up and Programming
  • Perfect for Both Single or Multi Part Production

MB-10R

32″ x 17″ x 19″

MB-14R

40″ x 20″ x 20″

MB-16R

60″ x 25″ x 24″

Categories: Milling, Tool Room

  • Specifications

  • Automation

  • Applications

MB-R SERIES SPECIFICATIONS MB-10R MB-14R MB-16R
MACHINE CAPACITY X Travel 32″ 40″ 60″
Y Travel 17″ 20″ 25″
Z Travel 19″ 20″ 24″
Table Load (Evenly Distributed) 2,000 lbs. 2,450 lbs. 2,950 lbs.
Ballscrew Size 1.26″ 1.26″ 1.57″
Table Size 14″ x 50″ 16″ x 54″ 18″ x 70″
T-Slots (No./Width) 3 / 0.630″ 3 / 0.630″ 5 / 0.630″
Table Top to Floor 31″ 33″ 36″
SPINDLE Motor (Peak) 12 HP 12 HP 12 HP
Max Spindle Torque 40 ft/lbs
Spindle Speeds (RPM) 60 – 8,000 RPM
Tool Type/Taper CAT 40 (BT-40 Optional)
Spindle Nose to Table (Max – Min) 25.75″ – 6.75″ 25″ – 5″ 28″ – 4″
Spindle Center to Column 17.5″ 20″ 25″
ATC Tool Storage Capacity 12 (20 optional)
Tool Change Time 7 Seconds
Tool Selection Bi-Directional
Max. Adjacent Tool Diameter 5.5″
Max. Tool Weight 15.4 LBS
Max. Tool Length 11.8″
PERFORMANCE Positioning Accuracy +/- 0.0002″
Positioning Repeatability +/- 0.0001″
Rapid Traverse 400 IPM
Cutting Feed Rate 0.001 – 300 IPM
Axis Thrust (Peak) 4,400 lbs.
GENERAL INFO Air Pressure Requirements 85 PSI; 3 CFM
Coolant Capacity 12 Gallons
Coolant Flow 3 Gal/Min
Power Requirements 35 AMP 208-250 VAC 3 Phase (380-500 VAC) 40 AMP (220 VAC ONLY)
Shipping Dimensions* (WxDxH) 50″ x 76″ x 76″ 54″ x 80″ x 78″ 72″ x 92″ x 89″
Operating Dimensions (WxDxH) 103″ x 80″ x 94″ 113″ x 80″ x 106″ 174″ x 92″ x 113″
Machine Weight 5,000 lbs. 7,000 lbs. 10,000 lbs.

CNC Control

The Fryer – Siemens 828 control is designed for ease of use in low volume toolroom and job shop facilities. Simple menu programming and fast set-up keys allow you make one-off parts in half the time of a manual machine. Multi mode operation allows you to use the machine manually, semi-automatic and full CNC mode. Canned cycles and graphic verify make set-up faster and easier.

FRYER-SIEMENS 828 CNC

  • Manual or CNC
  • Do-one mode
  • Teach mode
  • Conversational mode

TECHNOLOGY

  • Ultra reliable Siemens High Speed all digital control system
  • Regenerative drives save 40% electrical use
  • Digital drives provide better accuracy and surface finish
  • Absolute encoders never require you to ‘home’ machine

Geometry Creator

Enter part dimensions using the Simple Geometry Creator. The dimensions are drawn on the screen while you enter them and missing information is automatically calculated.

Pocketing Cycles

Choose from a wide variety of pocket shapes. Then answer basic questions about the depth of cut, tool type and finish stock allowance.

Drilling Cycles

Choose from a wide variety of drill cycles including drill, deep hole drill, peck drill, bore, rigid tap, rigid peck tap and more.

3D Graphic Simulation

The 828 uses sophisticated solid model graphic verification to accurately show what your part will look like BEFORE you cut it. Also choose from wireframe or multiview screen.

  • Specifications

MB-R SERIES SPECIFICATIONS MB-10R MB-14R MB-16R
MACHINE CAPACITY X Travel 32″ 40″ 60″
Y Travel 17″ 20″ 25″
Z Travel 19″ 20″ 24″
Table Load (Evenly Distributed) 2,000 lbs. 2,450 lbs. 2,950 lbs.
Ballscrew Size 1.26″ 1.26″ 1.57″
Table Size 14″ x 50″ 16″ x 54″ 18″ x 70″
T-Slots (No./Width) 3 / 0.630″ 3 / 0.630″ 5 / 0.630″
Table Top to Floor 31″ 33″ 36″
SPINDLE Motor (Peak) 12 HP 12 HP 12 HP
Max Spindle Torque 40 ft/lbs
Spindle Speeds (RPM) 60 – 8,000 RPM
Tool Type/Taper CAT 40 (BT-40 Optional)
Spindle Nose to Table (Max – Min) 25.75″ – 6.75″ 25″ – 5″ 28″ – 4″
Spindle Center to Column 17.5″ 20″ 25″
ATC Tool Storage Capacity 12 (20 optional)
Tool Change Time 7 Seconds
Tool Selection Bi-Directional
Max. Adjacent Tool Diameter 5.5″
Max. Tool Weight 15.4 LBS
Max. Tool Length 11.8″
PERFORMANCE Positioning Accuracy +/- 0.0002″
Positioning Repeatability +/- 0.0001″
Rapid Traverse 400 IPM
Cutting Feed Rate 0.001 – 300 IPM
Axis Thrust (Peak) 4,400 lbs.
GENERAL INFO Air Pressure Requirements 85 PSI; 3 CFM
Coolant Capacity 12 Gallons
Coolant Flow 3 Gal/Min
Power Requirements 35 AMP 208-250 VAC 3 Phase (380-500 VAC) 40 AMP (220 VAC ONLY)
Shipping Dimensions* (WxDxH) 50″ x 76″ x 76″ 54″ x 80″ x 78″ 72″ x 92″ x 89″
Operating Dimensions (WxDxH) 103″ x 80″ x 94″ 113″ x 80″ x 106″ 174″ x 92″ x 113″
Machine Weight 5,000 lbs. 7,000 lbs. 10,000 lbs.

  • Automation

CNC Control

The Fryer – Siemens 828 control is designed for ease of use in low volume toolroom and job shop facilities. Simple menu programming and fast set-up keys allow you make one-off parts in half the time of a manual machine. Multi mode operation allows you to use the machine manually, semi-automatic and full CNC mode. Canned cycles and graphic verify make set-up faster and easier.

FRYER-SIEMENS 828 CNC

  • Manual or CNC
  • Do-one mode
  • Teach mode
  • Conversational mode

TECHNOLOGY

  • Ultra reliable Siemens High Speed all digital control system
  • Regenerative drives save 40% electrical use
  • Digital drives provide better accuracy and surface finish
  • Absolute encoders never require you to ‘home’ machine

Geometry Creator

Enter part dimensions using the Simple Geometry Creator. The dimensions are drawn on the screen while you enter them and missing information is automatically calculated.

Pocketing Cycles

Choose from a wide variety of pocket shapes. Then answer basic questions about the depth of cut, tool type and finish stock allowance.

Drilling Cycles

Choose from a wide variety of drill cycles including drill, deep hole drill, peck drill, bore, rigid tap, rigid peck tap and more.

3D Graphic Simulation

The 828 uses sophisticated solid model graphic verification to accurately show what your part will look like BEFORE you cut it. Also choose from wireframe or multiview screen.

  • Applications

Related Products