Home / Machine Tools & Parts / Milling / FRYER HR Toolroom Series

FRYER HR Toolroom Series

Toolroom Horizontal Milling Machine

  • Small Footprint Horizontal
  • Fully Manual With 3 Handwheels
  • Simple Menu Programming
  • Perfect for Toolroom, Job Shop & Repair Facilities

HR-14

40″ x 20″ x 20″

Categories: Milling, Tool Room

  • Specifications

  • Automation

  • Applications

HR TOOLROOM SERIES SPECIFICATIONS HR-14
MACHINE CAPACITY X Travel 40″
Y Travel 20″
Z Travel 20″
Table Load (Evenly Distributed) 3,500 lbs.
Table Size 16″ x 54″
T-Slots (No./Width) 5 / 0.63″
Table Top to Floor 33.8″
SPINDLE Motor HP (Peak) 20 HP
Spindle Speed (RPM) 60 – 8,000 RPM
Spindle Torque 80 ft/lbs @ 350 RPM
Tool Type/Taper CAT 40 or BT-40
Spindle Nose to Table Center 2.9″ – 9″
Spindle Center to Table Top 2.2″ – 2″
ROTARY TABLE OPTION Platter Size 16″
Max. Rotation Speed 33 RPM
Max Table Load 3,000 lbs.
Positioning Accuracy 12 arc sec
Position Repeatability 5 arc sec
Spindle Center to Table Top 1.6″ – 0″
ATC OPTION Tool Storage Capacity 16 Station Arm Type
Tool Change Time 4 seconds
Max. Tool Diameter (full) 5.90″
Max. Tool Dia (adjacent empty) 9.85″
Max. Tool Weight 15.0 lbs
Max. Tool Length 11″
PERFORMANCE Positioning Accuracy +/- 0.0002″
Positioning Repeatability +/- 0.0001″
Ballscrew Diameter 1.57″
Rapid Traverse 600 IPM X, Y, Z
Cutting Feed Rate .001 – 400 IPM
Servo Type AC Digital Brushless
Axis Thrust (Peak) 3,000 lbs.
GENERAL INFO Air Pressure Requirements 90 PSI   3 CFM
Coolant Capacity 12 gallons
Coolant Flow 3 GPM
Power Requirements 40 AMP 430-500 VAC (220 VAC opt)
Shipping Dimensions* (WxDxH) 54″ x 80″ x 78″
Operating Dimensions (WxDxH) 113″ x 80″ x 106″
Machine Weight 9,000 lbs

CNC Control

The Fryer – Siemens 828 control is designed for ease of use in low volume toolroom and job shop facilities. Simple menu programming and fast set-up keys allow you make one-off parts in half the time of a manual machine. Multi mode operation allows you to use the machine manually, semi-automatic and full CNC mode. Canned cycles and graphic verify make set-up faster and easier.

FRYER-SIEMENS 828 CNC

  • Manual or CNC
  • Do-one mode
  • Teach mode
  • Conversational mode

TECHNOLOGY

  • Ultra reliable Siemens High Speed all digital control system
  • Regenerative drives save 40% electrical use
  • Digital drives provide better accuracy and surface finish
  • Absolute encoders never require you to ‘home’ machine

Geometry Creator

Enter part dimensions using the Simple Geometry Creator. The dimensions are drawn on the screen while you enter them and missing information is automatically calculated.

Pocketing Cycles

Choose from a wide variety of pocket shapes. Then answer basic questions about the depth of cut, tool type and finish stock allowance.

Drilling Cycles

Choose from a wide variety of drill cycles including drill, deep hole drill, peck drill, bore, rigid tap, rigid peck tap and more.

3D Graphic Simulation

The 828 uses sophisticated solid model graphic verification to accurately show what your part will look like BEFORE you cut it. Also choose from wireframe or multiview screen.

  • Specifications

HR TOOLROOM SERIES SPECIFICATIONS HR-14
MACHINE CAPACITY X Travel 40″
Y Travel 20″
Z Travel 20″
Table Load (Evenly Distributed) 3,500 lbs.
Table Size 16″ x 54″
T-Slots (No./Width) 5 / 0.63″
Table Top to Floor 33.8″
SPINDLE Motor HP (Peak) 20 HP
Spindle Speed (RPM) 60 – 8,000 RPM
Spindle Torque 80 ft/lbs @ 350 RPM
Tool Type/Taper CAT 40 or BT-40
Spindle Nose to Table Center 2.9″ – 9″
Spindle Center to Table Top 2.2″ – 2″
ROTARY TABLE OPTION Platter Size 16″
Max. Rotation Speed 33 RPM
Max Table Load 3,000 lbs.
Positioning Accuracy 12 arc sec
Position Repeatability 5 arc sec
Spindle Center to Table Top 1.6″ – 0″
ATC OPTION Tool Storage Capacity 16 Station Arm Type
Tool Change Time 4 seconds
Max. Tool Diameter (full) 5.90″
Max. Tool Dia (adjacent empty) 9.85″
Max. Tool Weight 15.0 lbs
Max. Tool Length 11″
PERFORMANCE Positioning Accuracy +/- 0.0002″
Positioning Repeatability +/- 0.0001″
Ballscrew Diameter 1.57″
Rapid Traverse 600 IPM X, Y, Z
Cutting Feed Rate .001 – 400 IPM
Servo Type AC Digital Brushless
Axis Thrust (Peak) 3,000 lbs.
GENERAL INFO Air Pressure Requirements 90 PSI   3 CFM
Coolant Capacity 12 gallons
Coolant Flow 3 GPM
Power Requirements 40 AMP 430-500 VAC (220 VAC opt)
Shipping Dimensions* (WxDxH) 54″ x 80″ x 78″
Operating Dimensions (WxDxH) 113″ x 80″ x 106″
Machine Weight 9,000 lbs

  • Automation

CNC Control

The Fryer – Siemens 828 control is designed for ease of use in low volume toolroom and job shop facilities. Simple menu programming and fast set-up keys allow you make one-off parts in half the time of a manual machine. Multi mode operation allows you to use the machine manually, semi-automatic and full CNC mode. Canned cycles and graphic verify make set-up faster and easier.

FRYER-SIEMENS 828 CNC

  • Manual or CNC
  • Do-one mode
  • Teach mode
  • Conversational mode

TECHNOLOGY

  • Ultra reliable Siemens High Speed all digital control system
  • Regenerative drives save 40% electrical use
  • Digital drives provide better accuracy and surface finish
  • Absolute encoders never require you to ‘home’ machine

Geometry Creator

Enter part dimensions using the Simple Geometry Creator. The dimensions are drawn on the screen while you enter them and missing information is automatically calculated.

Pocketing Cycles

Choose from a wide variety of pocket shapes. Then answer basic questions about the depth of cut, tool type and finish stock allowance.

Drilling Cycles

Choose from a wide variety of drill cycles including drill, deep hole drill, peck drill, bore, rigid tap, rigid peck tap and more.

3D Graphic Simulation

The 828 uses sophisticated solid model graphic verification to accurately show what your part will look like BEFORE you cut it. Also choose from wireframe or multiview screen.

  • Applications

Related Products