Home / Machine Tools & Parts / Tool Room / FRYER ET-TR Series

FRYER ET-TR Series

Easy Turn - Toolroom Turning

  • Manual, Semi-CNC or Full-CNC Modes
  • Easier to Use Than Conventional Lathe
  • Handle Driven “Do One” Cycles Eliminates Manual Set-Ups
  • Perfect for Prototype, Repair, Job Shop & Toolroom

ET-16

16″ Swing

ET-18

18″ Swing

ET-21

21″ Swing

ET-25

25″ Swing

Center Distances

40″, 60″, 80″, 120″

Spindle Bore Sizes

2.0″, 3.4″, 4.1″

Categories: Tool Room, Turning

  • Specifications

  • Automation

  • Applications

ET-TR SERIES SPECIFICATIONS ET-16 ET-18 ET-21 ET-25
MACHINE CAPACITY Swing Over Bed 16″ 18″ 21″ 25″
Swing Over Cross Slide 8.125″ 9.125″ 12″ 16″
Center Height 8.125″ 9.125″ 10.5″ 12.6″
Swing in Gap N/A N/A N/A N/A
Distance Between Centers 40″ (60″) 40″ (60″) 60″ (80″, 120″) 60″ (80″, 120″)
Width of Bed 14″ 14″ 14″ 14″
Width of Cross Slide 8.5″ 8.5″ 8.5″ 8.5″
Cross Slide Travel (X) 10″ 10″ 12″ 12.5″
Longitudinal Travel (Z) 37″ 37″ 57″ 57″
Optional Travel (Z) 57″ 57″ 80″ 80″
Ball Screw Size 1.625″ Z – 1.00″ X 1.625″ Z – 1.00″ X 1.625″ Z – 1.00″ X 1.625″ Z – 1.00″ X
Max Part Weight – Unsupported 500 lbs 500 lbs 800 lbs 800 lbs
Max Part Weight – Supported w/ S/R 1,500 lbs 2,500 lbs 3,000 lbs 3,000 lbs
SPINDLE Spindle Nose Camlock D1-6 Camlock D1-6 (D1-8) Camlock D1-8 (A2-11) Camlock D1-8 (A2-11)
Spindle Bore 2.05″ 2.05″ (3.4″) 3.40″ (4.01″) 3.40″ (4.01″)
Spindle Nose Taper MT – 6 MT – 6 Straight Straight
Spindle Motor HP (Peak) 10 HP 10 HP 15 HP 15 HP
Spindle Speed (RPM) 100 – 3,000 50 – 2,500 50 – 2,000 50 – 2,000
Speed Ranges Low 50 – 350 Low 50 – 300 Low 50 – 300
High 100 – 3,000 High 350 – 2,500 High 300 – 2,000 High 300 – 2,000
Speed Selection Single Gear Range Auto Shift Auto Shift Auto Shift
TAIL STOCK Quill Travel 5.0″ 5.0″ 5.0″ 5.0″
Quill Diameter 2.5″
Quill Taper Hole MT-5
PERFORMANCE Positioning Accuracy +/- 0.0002″
Positioning Repeatability +/- 0.0001″
Rapid Traverse (X,Z) 400 IPM
Servo Type AC Digital Brushless
Axis Thrust (Peak) 3,058 lbs. X 3,504 lbs. Z
GENERAL INFO Air Requirements 90 PSI – 5 CFM
Coolant Capacity 10 Gallons
Coolant Flow 2 GPM
Power Requirements 40 AMP
Voltage Requirements 208-240 VAC 3 PHASE (380-500 VAC Optional)
Shipping Dimensions* (WxDxH) 86″x72″x68″ 86″x72″x68″ 106″x76″x68″ 106″x76″x68″
Operating Dimensions (WxDxH) 86″x74″x68″ 86″x74″x68″ 106″x78″x68″ 106″x78″x68″
Machine Weight 5,000 lbs. 6,500 lbs. 7,500 lbs. 8,500 lbs.
60″ 6,000 lbs. 60″ 7,000 lbs. 40″ 7,000 lbs. 40″ 8,000 lbs.

CNC Control

The Fryer – Siemens 828 control is designed for ease of use in low volume toolroom and job shop facilities. Simple menu programming and fast set-up keys allow you make one-off parts in half the time of a manual machine. Multi mode operation allows you to use the machine manually, semi-automatic and full CNC mode. Canned cycles and graphic verify make set-up faster and easier.

FRYER-SIEMENS 828 CNC

  • Manual or CNC
  • Do-one mode
  • Teach mode
  • Conversational mode

TECHNOLOGY

  • Ultra reliable Siemens High Speed all digital control system
  • Regenerative drives save 40% electrical use
  • Digital drives provide better accuracy and surface finish
  • Absolute encoders never require you to ‘home’ machine

Lathe Contour

Geometry. Enter part dimensions using the Simple Geometry Creator. The dimensions are drawn on the screen while you enter them and missing information is automatically calculated.

Lathe Rough Cycle

Roughing cycle. Answer basic questions about the depth of cut, tool type and finish stock allowance.

Lathe Thread

Threading cycle. Answer basic questions about the thread size pitch and tool type.

Lathe Simulate

The 828 uses sophisticated solid model graphic verification to accurately show what your part will look like BEFORE you cut it. Also choose from wireframe or multi-view screen.

  • Specifications

ET-TR SERIES SPECIFICATIONS ET-16 ET-18 ET-21 ET-25
MACHINE CAPACITY Swing Over Bed 16″ 18″ 21″ 25″
Swing Over Cross Slide 8.125″ 9.125″ 12″ 16″
Center Height 8.125″ 9.125″ 10.5″ 12.6″
Swing in Gap N/A N/A N/A N/A
Distance Between Centers 40″ (60″) 40″ (60″) 60″ (80″, 120″) 60″ (80″, 120″)
Width of Bed 14″ 14″ 14″ 14″
Width of Cross Slide 8.5″ 8.5″ 8.5″ 8.5″
Cross Slide Travel (X) 10″ 10″ 12″ 12.5″
Longitudinal Travel (Z) 37″ 37″ 57″ 57″
Optional Travel (Z) 57″ 57″ 80″ 80″
Ball Screw Size 1.625″ Z – 1.00″ X 1.625″ Z – 1.00″ X 1.625″ Z – 1.00″ X 1.625″ Z – 1.00″ X
Max Part Weight – Unsupported 500 lbs 500 lbs 800 lbs 800 lbs
Max Part Weight – Supported w/ S/R 1,500 lbs 2,500 lbs 3,000 lbs 3,000 lbs
SPINDLE Spindle Nose Camlock D1-6 Camlock D1-6 (D1-8) Camlock D1-8 (A2-11) Camlock D1-8 (A2-11)
Spindle Bore 2.05″ 2.05″ (3.4″) 3.40″ (4.01″) 3.40″ (4.01″)
Spindle Nose Taper MT – 6 MT – 6 Straight Straight
Spindle Motor HP (Peak) 10 HP 10 HP 15 HP 15 HP
Spindle Speed (RPM) 100 – 3,000 50 – 2,500 50 – 2,000 50 – 2,000
Speed Ranges Low 50 – 350 Low 50 – 300 Low 50 – 300
High 100 – 3,000 High 350 – 2,500 High 300 – 2,000 High 300 – 2,000
Speed Selection Single Gear Range Auto Shift Auto Shift Auto Shift
TAIL STOCK Quill Travel 5.0″ 5.0″ 5.0″ 5.0″
Quill Diameter 2.5″
Quill Taper Hole MT-5
PERFORMANCE Positioning Accuracy +/- 0.0002″
Positioning Repeatability +/- 0.0001″
Rapid Traverse (X,Z) 400 IPM
Servo Type AC Digital Brushless
Axis Thrust (Peak) 3,058 lbs. X 3,504 lbs. Z
GENERAL INFO Air Requirements 90 PSI – 5 CFM
Coolant Capacity 10 Gallons
Coolant Flow 2 GPM
Power Requirements 40 AMP
Voltage Requirements 208-240 VAC 3 PHASE (380-500 VAC Optional)
Shipping Dimensions* (WxDxH) 86″x72″x68″ 86″x72″x68″ 106″x76″x68″ 106″x76″x68″
Operating Dimensions (WxDxH) 86″x74″x68″ 86″x74″x68″ 106″x78″x68″ 106″x78″x68″
Machine Weight 5,000 lbs. 6,500 lbs. 7,500 lbs. 8,500 lbs.
60″ 6,000 lbs. 60″ 7,000 lbs. 40″ 7,000 lbs. 40″ 8,000 lbs.

  • Automation

CNC Control

The Fryer – Siemens 828 control is designed for ease of use in low volume toolroom and job shop facilities. Simple menu programming and fast set-up keys allow you make one-off parts in half the time of a manual machine. Multi mode operation allows you to use the machine manually, semi-automatic and full CNC mode. Canned cycles and graphic verify make set-up faster and easier.

FRYER-SIEMENS 828 CNC

  • Manual or CNC
  • Do-one mode
  • Teach mode
  • Conversational mode

TECHNOLOGY

  • Ultra reliable Siemens High Speed all digital control system
  • Regenerative drives save 40% electrical use
  • Digital drives provide better accuracy and surface finish
  • Absolute encoders never require you to ‘home’ machine

Lathe Contour

Geometry. Enter part dimensions using the Simple Geometry Creator. The dimensions are drawn on the screen while you enter them and missing information is automatically calculated.

Lathe Rough Cycle

Roughing cycle. Answer basic questions about the depth of cut, tool type and finish stock allowance.

Lathe Thread

Threading cycle. Answer basic questions about the thread size pitch and tool type.

Lathe Simulate

The 828 uses sophisticated solid model graphic verification to accurately show what your part will look like BEFORE you cut it. Also choose from wireframe or multi-view screen.

  • Applications

Related Products