SUMMIT 30″ SWING METAL LATHES
5.1″ Spindle Bore, Center Distances: 80″, 120″, 160″ and 200″
Categories: Engine Lathes, Turning
Overview
Specifications
Standard Features
- Big 5.1″ thru hole for maximum workpiece flexibility
- Inch/metric threads w/ single switch lever
- Cuts most inch/metric threads without change gears
- Hardened & precision ground bedways for long lasting accuracy
- Forced lubrication to the headstock, carriage and bedways
- Mechanical disc clutch
- Removable gap
- Precision (3) bearing spindle
- Crossfeed and threading safety interlock
- Feed reversing at the apron
- Single lever control for feeds and rapids
- 2-speed tailstock for faster setups
Included Accessories
- Standard steady rest
- Extra capacity steady rest w/ rollers
- Follow rest
- Thread dial
- Coolant system
- Taper attachment
- 16″ 3 jaw chuck w/ solid jaws
- Carriage stop
- Work light
- Full-length splash guard
- Service wrenches & spanners
| SPECIFICATIONS: | 30″-S Series | |
|---|---|---|
| Capacities | ||
| Swing over bed | 29.9″ | |
| Swing over cross slide | 20.5″ | |
| Swing over gap | 37.4″ | |
| Headstock | ||
| Hole Through Spindle | 5.1″ | |
| Spindle speeds (17) | 7.5 – 1015 RPM | |
| Spindle Nose | D1-11 Camlock | |
| Threads | ||
| Threads per inch – number/range | (76) 1.6 – 60 | |
| Metric threads – number/range | (76) .5 – 180 | |
| Tailstock | ||
| Travel spindle barrel | 8.8″ | |
| Diameter of spindle barrel | 4.1″ | |
| Tailstock center | #6 MT | |
| Bed | ||
| Width of bed | 22″ | |
| Motor | ||
| Main drive motor | 20 HP | |
| Miscellaneous | ||
| Shipping weight (approximate) | 10,780 lbs. | |
Overview
Standard Features
- Big 5.1″ thru hole for maximum workpiece flexibility
- Inch/metric threads w/ single switch lever
- Cuts most inch/metric threads without change gears
- Hardened & precision ground bedways for long lasting accuracy
- Forced lubrication to the headstock, carriage and bedways
- Mechanical disc clutch
- Removable gap
- Precision (3) bearing spindle
- Crossfeed and threading safety interlock
- Feed reversing at the apron
- Single lever control for feeds and rapids
- 2-speed tailstock for faster setups
Included Accessories
- Standard steady rest
- Extra capacity steady rest w/ rollers
- Follow rest
- Thread dial
- Coolant system
- Taper attachment
- 16″ 3 jaw chuck w/ solid jaws
- Carriage stop
- Work light
- Full-length splash guard
- Service wrenches & spanners
Specifications
| SPECIFICATIONS: | 30″-S Series | |
|---|---|---|
| Capacities | ||
| Swing over bed | 29.9″ | |
| Swing over cross slide | 20.5″ | |
| Swing over gap | 37.4″ | |
| Headstock | ||
| Hole Through Spindle | 5.1″ | |
| Spindle speeds (17) | 7.5 – 1015 RPM | |
| Spindle Nose | D1-11 Camlock | |
| Threads | ||
| Threads per inch – number/range | (76) 1.6 – 60 | |
| Metric threads – number/range | (76) .5 – 180 | |
| Tailstock | ||
| Travel spindle barrel | 8.8″ | |
| Diameter of spindle barrel | 4.1″ | |
| Tailstock center | #6 MT | |
| Bed | ||
| Width of bed | 22″ | |
| Motor | ||
| Main drive motor | 20 HP | |
| Miscellaneous | ||
| Shipping weight (approximate) | 10,780 lbs. | |
